cli_test on Genesys2  #306

Activity

1. MikeOpenHWGroup commented on May 14, 2023

   

   MikeOpenHWGroup

   on May 14, 2023

   Contributor

   More actions

   Hi @yelabWang, thanks for your interest in the CORE-V-MCU. The Quick Start Guide does not support the Genesys2 board (and I have not personally tried it). Having said, that the Makefiles do support Genesys2, but you will need to dig through the Makefiles and scripts to built and compile it all properly.

   @gmartin102 are you aware of any specific documentation provided for the Genesys2 hardware?
2. gmartin102 commented on May 14, 2023

   

   gmartin102

   on May 14, 2023 via email

   Contributor

   More actions

   There is no specific documentation, but it might be related to the fact that the genesys2 board runs at different clock rates from the than the Nexsys board. The CLI test code will need to be modified for the correct baud rate. How was the CLI-test program loaded into memory? Eclipse through the Ashling JTAG or a digilent HS2? Greg From: Mike Thompson ***@***.***> Date: Sunday, May 14, 2023 at 3:04 PM To: openhwgroup/core-v-mcu ***@***.***> Cc: Greg Martin ***@***.***>, Mention ***@***.***> Subject: Re: [openhwgroup/core-v-mcu] cli_test on Genesys2 (Issue #306) CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. Hi @yelabWang<https://github.com/yelabWang>, thanks for your interest in the CORE-V-MCU. The Quick Start Guide does not support the Genesys2 board (and I have not personally tried it). Having said, that the Makefiles do support Genesys2, but you will need to dig through the Makefiles and scripts to built and compile it all properly. @gmartin102<https://github.com/gmartin102> are you aware of any specific documentation provided for the Genesys2 hardware? — Reply to this email directly, view it on GitHub<#306 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AP2QBU5HLXA4YAJRJ3TIDHTXGE3GFANCNFSM6AAAAAAYAUNLMU>. You are receiving this because you were mentioned.Message ID: ***@***.***>
3. BaoBao-zhu commented on May 16, 2023

   

   BaoBao-zhu

   on May 16, 2023

   Author

   More actions

   There is no specific documentation, but it might be related to the fact that the genesys2 board runs at different clock rates from the than the Nexsys board. The CLI test code will need to be modified for the correct baud rate. How was the CLI-test program loaded into memory? Eclipse through the Ashling JTAG or a digilent HS2? Greg From: Mike Thompson @.> Date: Sunday, May 14, 2023 at 3:04 PM To: openhwgroup/core-v-mcu @.> Cc: Greg Martin @.>, Mention @.> Subject: Re: [openhwgroup/core-v-mcu] cli_test on Genesys2 (Issue #306) CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. Hi @yelabWanghttps://github.com/yelabWang, thanks for your interest in the CORE-V-MCU. The Quick Start Guide does not support the Genesys2 board (and I have not personally tried it). Having said, that the Makefiles do support Genesys2, but you will need to dig through the Makefiles and scripts to built and compile it all properly. @gmartin102https://github.com/gmartin102 are you aware of any specific documentation provided for the Genesys2 hardware? — Reply to this email directly, view it on GitHub<#306 (comment)>, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AP2QBU5HLXA4YAJRJ3TIDHTXGE3GFANCNFSM6AAAAAAYAUNLMU. You are receiving this because you were mentioned.Message ID: @.***>

   I tried using the uart burning program, but after modifying the baud rate and clock cycle, I still couldn't run clitest correctly