One receiver. Two hardware platforms. Dozens of decoders. No installation.
A complete radio receiver in a single file. No installation, no internet, no account: plug in an RTL-SDR stick, open the page, and listen.
OFFgrid-SDR is a full software-defined radio receiver that runs entirely in your web browser from one file. Put index.html on a USB pen drive with an RTL-SDR stick and an antenna, and you have a working shortwave, FM, airband, VHF/UHF and DRM and DAB digital radio receiver on almost any computer: no software to install, no administrator rights, no drivers to download on site (on most systems), and no internet connection needed.
It can also use an SDRplay RSP across your network, through SDRplay's SDRconnect, though the heart of it is still an RTL-SDR stick and that one index.html file. At home, connect to the RSP on your network, with nothing to plug in (and on a slow network, Lite mode needs only about 0.2 MB/s); away from home, plug in an RTL-SDR stick and choose it in Settings → Device.
Can be used on a Chromebook in tablet mode:
The humble RTL-SDR stick needs some love. It has always been treated as an add-on: a cheap way into other SDR software, never the star of the show. I decided to change that, and build a receiver made for the RTL-SDR, that anyone can carry on a pen drive and use anywhere.
10 MHz overview → click a signal → 2.04 MHz view with a waterfall → zoom in, or pause and box a signal for a detailed replay → narrow it with A/B → save it for later.
- Signal Monitor (new): watch up to 8 signals at once, each a coloured, numbered band on the spectrum, measured all the time whatever you listen to: average and peak level, noise floor, S/N, bandwidth, occupancy, transmissions (how many, average and longest, active and silent time, and the interval between them, marked "Every" when regular), fades, and drift (now, in Hz a second; over 10 minutes; and the whole shift).
- Follow tracks a drifting signal, a satellite's Doppler shift or a wandering transmitter: the band, its speaker and (while tuned to it) the radio follow it.
- Analyse works out a signal's modulation in about 6 seconds, without retuning: Morse speed, FSK shift and baud rate, PSK rate, AM, FM or SSB, naming standard modes (RTTY, NAVTEX/DSC, PSK31/63, weather RTTY).
- A speaker for each signal (left to right, Solo, levelled), one heard at a time by default, following the radio; the one you're hearing glows. ⏺ records a clip of each transmission, to play or save as WAV.
- Drag the bands, name signals, save the log as CSV, and reset the figures.
- SDRplay RSPs through SDRconnect:
- Lite mode for slow networks: SDRconnect sends its own sound and spectrum, about 0.2 MB/s instead of 8 MB/s. Switch with LITE at any time while connected.
- Wide views of 6, 8 and 10 MHz straight from the RSP (up to 40 MB/s in full mode, no more in Lite mode), with a span switch (2M–10M) beside LITE, and Panorama as the RSP's own 10 MHz view.
- Test now measures the network, offering Lite mode if it can't carry the full stream, and finds every antenna port. The RSPdx's Antenna C is always in the antenna table.
- DAB: a forgiving re-lock (a gap in the samples costs a blip at most, not a second or more of silence), and instant changes of multiplex, and from FM to DAB, through SDRconnect.
- New bands: LW (long wave, 100–500 kHz), and CB US (AM), CB Europe (FM) and CB UK (its own band, FM), each with its channels, opening on channel 19.
- The waterfall replay adds SAM-U / SAM-L, and NFM above 25 MHz (CB, 10 m FM).
- Fixes: RTTY sets mark and space the right way round reliably; OVL's back-off leaves headroom; the Low-power suggestion waits for a real struggle; on the RTL-SDR Blog V4, the stick is kept clear of its 28.8 MHz spike where it can be (CB is now clean); unplugging a stick no longer stops an SDRconnect session; and more.
- Self-test and demo: the self-test checks Safari's filter, DAB on single-frequency networks, the Signal Monitor (a satellite pass included), and says when its page was hidden; the demo gains long-wave stations, a navigation beacon and a satellite with Doppler, and its DAB multiplex a second transmitter.
- SDRplay RSPs, through SDRconnect (requested feature): as well as an RTL-SDR stick, OFFgrid-SDR can use an SDRplay RSP running SDRplay's SDRconnect, on the same computer or another on your network. See Using an SDRplay RSP, and the full guide, SDRconnect.md.
- 2.2: VDL2 aircraft datalink (every channel at once, with each aircraft's country) and a full-screen mode (which should work on Android devices too), both requested features; DAB station text, logos and SlideShow; DRM station text and pictures; every kind of DAB audio checked, with fixes for 24 kHz and joint-stereo MP2; five band tabs; the More menu grouped; selecting further back in the paused waterfall; and much lighter on slower computers.
- 2.1: DAB and DAB+ digital radio with sound, its stations, formats and signal, recognised by AUTO; DRM in xHE-AAC with sound; a DAB multiplex and an xHE-AAC station in the demo.
- 2.0: DRM digital radio with sound (AAC, with SBR and parametric stereo), its name, settings and signal quality, recognised by AUTO; 6 m and 4 m; a wider status line; fixes to the waterfall replay, RTTY's automatic reverse and noise reduction; and OFFgrid-SDR became free software under the GNU GPL.
Right mouse click to watch a DRM demo in a new page
- 1.9: APRS and AIS (ships on both marine channels at once); a first-time setup that sets your location, calibrates the stick and sets the clock from a time station; Clock details and a clock that learns your computer's drift; WSPR that corrects a clock a minute out; HF upconverters such as the Nooelec Ham It Up; each stick keeping its own correction; and the FM band for your country. 1.9.1 fixed the Ham It Up converter's offset not being applied correctly.
- 1.8: WSPR, Time signal (CHU, WWV, WWVH, RWM), deeper FT8/FT4 decoding, Heard and Band survey.
- 1.7: a much smarter AUTO, FT4, station countries and distances, keyboard shortcuts, memory markers and Check for updates.
- 1.6: the always-visible top bar and simpler layout, the OVL indicator, and FT8, ACARS, PSK and weather fax.
- 1.5: the AI voice cleaner, smart notch, logbook, frequency labels and new-signal alerts. 1.4: waterfall replay, AUTO and the first six decoders.
- Remote stations and expeditions: an Antarctic base, a ship or a field camp can listen to shortwave news, weather fax, NAVTEX and more, with no internet at all.
- Emergency and resilience kits: when the internet or the power grid is down, radio still works, and the whole receiver fits on a pen drive.
- Remote monitoring: leave it running for hours, recording, and saving weather fax charts automatically.
- Locked-down or shared computers: schools, libraries, work laptops and Chromebooks: it's just a page you open.
- Privacy: nothing leaves your computer. The page makes no network requests of its own, except two optional buttons when you click them: Identify (looks up the tuned frequency online) and Check for updates (looks on GitHub).
- Fully offline, FT8 included: the clock is set from time stations and the stations heard; countries come from a built-in table, and your location from 620 built-in cities.
- Demo mode (append ?demo to the index.html) for teaching in ham radio classes, clubs and meetups.
| An RTL-SDR stick | Tested with the RTL-SDR Blog V4 (recommended: shortwave with no adapter, and a 4.5 V bias-tee), the Blog V3 and the Nooelec NESDR SMArt v5. Other sticks with an R820T, R820T2 or R828D tuner should work; older E4000, FC0012, FC0013 and FC2580 sticks won't. |
| An antenna | The telescopic one is fine for FM. For medium wave and shortwave, tested with the AURSINC GA800 active loop and the YouLoop. For APRS and AIS, a VHF antenna mounted high. |
| An HF upconverter (optional) | Not needed with the V4. For other sticks, a converter such as the Ham It Up (Settings → Device → HF upconverter). |
| Or: an SDRplay RSP | Through SDRconnect (1.0.6 or later, with its WebSocket API on), on any computer on your network, or the same one: no USB stick or WebUSB needed (Settings → Device). The full stream needs about 8 MB/s at 2 MHz (up to 40 MB/s for the 10 MHz wide view: wired gigabit); Lite mode needs about 0.2 MB/s, for Wi-Fi and slower networks. |
| A browser with WebUSB | Chrome, Edge, or another Chromium-based browser. Tested on Windows 11, macOS Tahoe and ChromeOS (including a budget Lenovo 300e Chromebook). Firefox and Safari can run demo mode, or use an RSP through SDRconnect. |
Works on: Windows, macOS, Linux and ChromeOS computers, and Android tablets (Chrome, with the stick on a USB-C OTG adapter; a powered hub if the tablet can't supply the bias-tee). Phones aren't supported: the screen is too small for the controls. iPhones and iPads can't use a stick (Safari has no WebUSB), but can use an RSP through SDRconnect.
Sending a kit somewhere without internet: pack the stick, an antenna and a pen drive with index.html, README.txt (the offline guide), a settings backup with your memories and labels (Settings → Backup), Zadig for Windows, and a browser installer if needed. Run the setup first (Settings → Calibration → Run setup again), so the kit arrives with its location, calibration and clock set.
OFFgrid-SDR is one file, index.html; everything else here is documentation and licences.
- Download
index.html: click it in the file list above, then Download raw file. (For everything, use Code → Download ZIP.) - Open it in Chrome or Edge.
- Plug in the stick, press Power on, and choose the stick in the browser's USB chooser.
No stick yet? Open index.html?demo for demo mode: simulated stations showing every feature, from FM stereo with RDS, fading shortwave, SSB and Morse to weather fax, RTTY, NAVTEX, DSC, SSTV, PSK, FT8, FT4, WSPR, time stations, ACARS, APRS, AIS ships, Hellschreiber, two DRM stations (AAC and xHE-AAC), a DAB multiplex with two stations (heard from two transmitters at once), long-wave broadcasters and a navigation beacon, a satellite beacon on 145.900 MHz whose frequency falls with the Doppler shift on each pass (for the Signal Monitor's Follow), and "The Buzzer".
Keeping up to date: press Check for updates in the help panel (?). To update, put the new index.html in place of the old one: your settings and memories are kept (export a backup first, to be safe).
- Windows: run Zadig, choose Options → List All Devices, select Bulk-In, Interface (Interface 0) (or RTL2838UHIDIR), choose WinUSB and click Replace Driver.
- macOS and Chromebooks: no configuration needed.
- Linux: stop the TV driver from claiming the stick, and give your user access to it:
Then unplug the stick and plug it back in. With Snap Chromium on Ubuntu, also run
echo 'blacklist dvb_usb_rtl28xxu' | sudo tee /etc/modprobe.d/rtl-sdr-blacklist.conf sudo modprobe -r rtl2832_sdr dvb_usb_rtl28xxu # or reboot echo 'SUBSYSTEM=="usb", ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="2838", MODE="0666"' | sudo tee /etc/udev/rules.d/20-rtlsdr.rules sudo udevadm control --reload-rules && sudo udevadm trigger
sudo snap connect chromium:raw-usb.
Only one program can use the stick at a time, so close SDR#, SDR++, gqrx or rtl_tcp first.
OFFgrid-SDR works with an RTL-SDR stick by default, but it can also use an SDRplay RSP through SDRplay's SDRconnect software, on the same computer or another on your network (such as a Raspberry Pi in the shed). SDRconnect must already be running on the RSP's computer, with its WebSocket API on port 5454; then choose SDRconnect in Settings → Device, enter its address, press Test, then Power on.
- RSP1A and RSP1B need nothing more; the RSPdx's antennas switch by frequency (A from 30 MHz up, B below, by default; Antenna C works up to 200 MHz, and is always in the table); the RSPduo uses one tuner.
- Test checks SDRconnect answers, lists the RSP's antenna ports, and measures your network: whether it keeps up, only just, or is too slow for the full stream, offering Lite mode when it isn't.
- Lite mode (LITE, in the row of badges under the frequency, or Settings → Device): for a slow network, SDRconnect demodulates and sends its own sound and spectrum, about 0.2 MB/s instead of about 8 MB/s at 2 MHz. Switch it either way at any time while connected. The speaker, the audio decoders (RTTY, CW, PSK, NAVTEX, DSC, fax, SSTV, FT8 and the rest), the spectrum, the waterfall and the Signal Monitor's measurements all carry on; DAB, DRM, AIS, VDL2, the waterfall replay, and the monitor's analysis, speakers and recording need the full stream.
- Wide views of 6, 8 and 10 MHz, straight from the RSP: the span switch beside LITE (2M–10M), or Settings → Device → Sample rate. In full mode they need 24, 32 and 40 MB/s (wired gigabit for 10 MHz); in Lite mode, no more than usual. Panorama switches straight to the 10 MHz view, and back to your width when you click a signal.
- There's no bias-tee control through SDRconnect (its API, 1.0.3, has none): switch it on in SDRconnect, or in an SDRconnect profile that OFFgrid-SDR applies when it connects, or use the antenna's own injector.
- Open OFFgrid-SDR from a file or an
http://address: a page served overhttps://can't connect to SDRconnect. - SDRconnect 1.0.6 or later; 1.0.10 still reports its API as 1.0.3.
The full guide, SDRconnect.md, covers installing SDRconnect, running the headless server as a service that starts at boot (with a Raspberry Pi example), the firewall, configuring OFFgrid-SDR, the RSP models, how the RSP's two gains are handled, and troubleshooting.
- FM broadcast in stereo with RDS (the band follows your country); long wave (100–500 kHz: broadcasters, navigation beacons, the 136 and 472 kHz amateur bands and NAVTEX); medium wave; and shortwave with a button for every broadcast band, 120 m to 11 m.
- Amateur bands: 160 m to 10 m, 6 m, 4 m (where allocated), 2 m and 70 cm.
- PMR446 channel by channel; CB, as each country uses it: CB US (AM, 26.965–27.405 MHz), CB Europe (FM, the same 40 channels) and CB UK (FM, its own 27.60125–27.99125 MHz), stepping a channel at a time and showing the channel number; and airband (its own Air tab) with 8.33 kHz channel steps and channel names.
- Mystery: famous unexplained stations such as The Buzzer (UVB-76) and The Pip.
- DAB (its own tab): every Band III channel, 5A to 13F, each opening in DAB mode on the multiplex.
- Any frequency from 100 kHz to 1766 MHz: type it in (
198k,162.025,1090M). - Each band remembers your last frequency, step and RF gain.
The same buttons on every band: AUTO · FM · AM · SAM · USB · LSB · CW · More ▾. FM is wide on the FM band and narrow elsewhere; SAM (synchronous AM) stops fading distortion, and SAM-U / SAM-L use one sideband to dodge interference. More holds the decoders. Modes that don't fit where you're tuned are greyed out, with the reason in the tooltip.
Switch AUTO on, and wherever you tune it listens for a couple of seconds, works out what the signal is, and switches to the right mode, tuned onto it:
| Where | What AUTO recognises |
|---|---|
| Shortwave | CW, RTTY, PSK31/63/125, NAVTEX, DSC, weather fax, SSTV, Hellschreiber, AM and SSB (judging USB or LSB from the voice, and tuning to within a few hertz) |
| FT8, FT4 and WSPR frequencies, time stations | FT8, FT4, WSPR and Time signal |
| VHF / UHF | Narrowband FM, airband AM, ACARS, APRS and AIS on their channels |
| FM broadcast band | Wideband FM |
| Long, medium and short wave | DRM: it switches to DRM, so the name and sound follow (and back to AM if no DRM signal is there after all) |
| VHF Band III (174–240 MHz) | DAB: anywhere in a multiplex, it moves to the channel's centre in DAB mode, so the station list follows (and back to narrowband FM if no multiplex is there) |
- DAB and DAB+: the multiplex's name and stations, to pick from; the sound of either kind (DAB+ in HE-AAC, DAB in MP2, at any bit rate), with each station's format, bit rate, channels and programme type, its "now playing" text, its logo or SlideShow pictures where the multiplex sends them, and the signal in dB.
- DRM: digital radio with sound (AAC and xHE-AAC), the station's name, language, text message, SlideShow pictures, settings and signal quality.
- RDS on FM: station name, programme type, RadioText and clock.
- Morse (CW), 4 to 60 words per minute, and RTTY, finding the shift, speed and mark/space by itself.
- NAVTEX maritime safety messages, and DSC ships' calls (distress in red).
- FT8 and FT4 with each station's country, distance and bearing, CQ filtering and sorting, and deeper decoding that finds weaker stations hidden under strong ones (◆).
- WSPR beacons down to about −28 dB, correcting a clock a minute or so out.
- Time signal from CHU, WWV, WWVH or RWM, with Find a time station, Set by hand and Clock details; Heard and Band survey for who you can hear and which bands are open.
- APRS positions, weather and messages, and AIS ships on both channels at once, each with distance and bearing.
- VDL2 aircraft datalink (VDL Mode 2): every channel in view at once, ACARS messages in full, the rest summarised, each aircraft's country.
- ACARS aircraft messages, SSTV pictures (Martin, Scottie, PD), PSK31/63/125, Hellschreiber, and weather fax charts saved as PNG.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Switch on the waterfall buffer (15, 30 or 60 seconds), press ⏸, and draw a box around any signal from the last few seconds: a replay window plays it on a loop, zoomed in. Give it its own mode (SAM-U and SAM-L included, and NFM above 25 MHz) and filters, retune within the box, decode Morse, read RDS or a DRM station's name, loop part of it with A/B, and Save it as MP3 plus a raw IQ file for SDR#, SDR++ and other SDR software.
Watch up to 8 signals at once, while you listen to anything else in view. Tune to a signal and press Watch tuned signal: it becomes a coloured, numbered band on the spectrum, and the panel measures it all the time, in a fixed grid: average and peak level, noise floor, S/N, bandwidth, occupancy, transmissions (how many, average length, longest, active and silent time, and the interval between them, marked "Every" when regular, as a beacon's is), fades, centre and present frequency, and drift (now, in Hz a second; over 10 minutes; and the whole shift).
- Follow keeps the band on a drifting signal, a satellite's Doppler shift on a pass or a wandering transmitter; its speaker follows it, and so does the radio while tuned to it.
- Analyse works out a signal's modulation from about 6 seconds of it, without retuning: Morse speed, FSK shift and baud rate, PSK rate, AM, FM or SSB, and the standard mode it matches.
- Speakers: each signal can have its own, placed left to right, levelled, with Solo. One is heard at a time by default, following the radio (click a band to move the sound there); the signal you're hearing is outlined in its colour and glows on the spectrum.
- ⏺ records a clip of each transmission, from 1.5 s before it starts, to play or save as WAV.
- Drag a band by its tag, or its edges; name a signal (✎); Save log as CSV (each transmission's start and end in UTC, length and peak S/N); Reset stats. The monitor pauses with the waterfall, and the paused time isn't counted.
- Spectrum and waterfall: click to tune, zoom up to 256×, memory markers, peak hold, averaging, new-signal alerts and a signal info popup.
- Panorama: up to 10 MHz at once, around you or across HF; through SDRconnect, the RSP's own 10 MHz view, at once.
- OVL overload indicator, with one-click gain back-off and Undo; RF gain per band.
- Noise reduction, a noise blanker, a mains-hum filter, an auto notch, the AI voice cleaner (RNNoise) and the smart notch for whines.
- SSB filter widths and passband shift, AGC speed, squelch, Seek and Scan through your memories.
- Frequency calibration from a time station, and Identify (when online): a web search, Google's AI Mode, or the shortwave.live schedule for the tuned frequency.
- CPU and FPS figures, and Low-power mode for older or slower computers.
- Keyboard shortcuts: ← → step (Shift: seek), ↑ ↓ volume, PgUp/PgDn band, 0–9 type a frequency, A AUTO, Space pause, Z zero-beat, M mute, R record, + − zoom, K shortcuts, ? help.
Record to MP3 or WAV; 50 memories; frequency labels; a logbook that logs stations and decodes by itself and exports CSV; a settings backup for preparing a kit; and a diagnostics log to help track down problems. It keeps running in a background tab, recovers by itself if the stick is unplugged or resets, and decoders recover from broken audio.
- Browsers: WebUSB is only in Chromium-based browsers (Chrome, Edge, Opera…); Firefox and Safari can run demo mode, or use an SDRplay RSP over the network through SDRconnect. One program at a time can use the stick.
- Tuners: R820T, R820T2 or R828D sticks only; older E4000, FC0012, FC0013 and FC2580 sticks won't work.
- SDRplay RSPs (through SDRconnect): supported across the local network, with limits:
- RSPs must be set up on a computer running SDRconnect (the headless server, as in SDRconnect.md), with its WebSocket API on (port 5454), and it has to be running for OFFgrid-SDR to connect to.
- No bias-tee control on RSP Devices: SDRconnect's API (version 1.0.3) has none. Switch it on in SDRconnect, or in an SDRconnect profile that OFFgrid-SDR applies when connecting. RTL devices work fine if Bias T is available for the RTL device model.
- Only the first tuner of the RSPduo is used.
- Network: the full stream needs about 8 MB/s at 2 MHz, rising to 40 MB/s for the full 10 MHz wide view (wired gigabit). On Wi-Fi or a slower network use Lite mode, about 0.2 MB/s at any width. Test measures what your network can carry.
- In Lite mode, DAB, DRM, AIS, VDL2, the waterfall replay, and the Signal Monitor's analysis, speakers and recording need the full stream; the sound runs about 0.3 s behind, and the spectrum is coarser.
- Retuning goes over the network, so Seek, Scan and the band survey are slower than with a USB stick. The RSP's notch filters, HDR mode and AGC are left to SDRconnect; the RSPdx's Antenna C works up to 200 MHz.
- Open OFFgrid-SDR from a file or an
http://address: a page served overhttps://can't connect to SDRconnect.
- DRM needs a good signal (about 10 dB for 16-QAM, 16 dB for 64-QAM); below that, the settings are read but not the name or sound. The few stations using unequal protection or hierarchical modulation aren't decoded yet.
- DAB needs a good signal: about 8 dB for the sound, while the station list comes through down to about 3 dB. An outdoor or loft VHF aerial helps a great deal. DAB mode runs the stick at 2.048 MHz, centred on the multiplex; Station logos and slideshow pictures are only available where the multiplex broadcasts them, and other DAB data services aren't shown.
- RTL-SDR Blog V4 near 28.8 MHz: the stick's own 28.8 MHz clock shows as a strong spike there (it stays with the antenna disconnected: it comes from the stick, not the band), raising the noise around it. Below 28.8 MHz, OFFgrid-SDR places the stick so the spike stays out of its view where it can, so CB around 27 MHz is clear of it; 10 m, which crosses 28.8 MHz, can't avoid it.
- Signal Monitor measures only what's in the radio's present view (2 MHz with a stick, up to 10 MHz with an RSP): signals out of view are paused, not watched. Its clips are kept in memory (40 MB at most) and are lost when the page closes, so save the ones to keep. Analyse is dependable from about 8–10 dB.
- Waterfall replay uses memory (about 123 MB for 30 seconds), so it's off by default, and a selection can't cross a retune.
- AUTO judges a couple of seconds of signal, so it can be wrong on very weak signals: choose the mode yourself if something sounds wrong.
- FT8 and FT4 reach slightly less deep than WSJT-X on a single weak station. Time signals: MSF and DCF77 are below the sticks' range, and a web page can't set the computer's own clock (Clock details shows how).
- Weather fax: the US National Weather Service has proposed closing its HF radiofax stations towards the end of 2026; they're marked in the station list.
- Smaller points: Morse may miss the first letter while locking on; the sound runs about 0.2 s behind the waterfall (Bluetooth adds more); reception is weaker below about 500 kHz; with a stick, Panorama looks at one slice at a time; the AI voice cleaner is built for speech; DSC calls last only about 6 seconds; an HF upconverter's switch can only be reminded, not set; on direct-sampling sticks the RF gain has no effect on shortwave.
- Audio extensions need Allow access to file URLs (in
chrome://extensions) when OFFgrid-SDR is opened as a file. Background tabs: if Chrome's Memory Saver puts the tab to sleep, everything stops: add OFFgrid-SDR to "Always keep these sites active". Run the self-test with its page in view: Chrome slows hidden pages, and it says so if its page was hidden. - Slower computers: use Low-power mode; a very old or cheap machine may still struggle.
OFFgrid-SDR is free. If it's useful to you, you can buy me a coffee. ☕
OFFgrid-SDR is built on the work of others:
- @jtarrio/webrtlsdr by Jacobo Tarrío: the WebUSB driver for the RTL2832U and its tuners, including the RTL-SDR Blog V4's HF upconverter. Apache License 2.0. Several of OFFgrid-SDR's fixes to it have since been taken into the original. Version 3.0.7 includes fixes for problems found with OFFgrid-SDR: many thanks to Jacobo for his help.
- @jtarrio/signals by Jacobo Tarrío: the signal processing, including the FFT, filters, and the FM, AM, SAM (with its selectable sidebands), SSB and CW demodulators. Apache License 2.0.
- Google Radio Receiver, the original Chrome app these libraries grew from.
- Osmocom rtl-sdr, for working out how to use these USB TV sticks as software-defined radios.
- RTL-SDR Blog, for the V4 hardware and their open-source driver work.
- FAAD2 by M. Bakker, Nero AG, Ahead Software AG and contributors: the AAC decoder that plays DRM's and DAB+'s sound, built in with its DRM support and one small change of OFFgrid-SDR's, so that it also decodes DAB+ (whose fill elements a DRM-enabled build refused). GPL 2 or later. Its exact source, the change and the build script are in the
licenses/faad2folder. - libxaac by Ittiam Systems, part of the Android Open Source Project: the xHE-AAC decoder that plays DRM stations using xHE-AAC, built in unmodified with OFFgrid-SDR's small wrapper. Apache License 2.0. Its exact source and build script are in the
licenses/libxaacfolder. - pl_mpeg by Dominic Szablewski, whose MP2 decoder (based on kjmp2 by Martin J. Fiedler) plays the original DAB's sound, built in with three small changes for DAB (MPEG-2's 24 kHz frames accepted, as kjmp2 1.1 does, with their frame sync; and joint and plain stereo frames treated alike), with OFFgrid-SDR's small wrapper. MIT License. Its modified source, the changes, and the build script are in the
licenses/pl_mpegfolder. - welle.io by Albrecht Lohofener and contributors, the open-source DAB receiver: OFFgrid-SDR's DAB receiver uses its tables, from the DAB standard (ETSI EN 300 401), and follows its methods. GPL 2 or later.
- Dream, the open-source DRM receiver by Volker Fischer (Technische Universität Darmstadt) and contributors: OFFgrid-SDR's DRM receiver uses Dream's tables and follows its methods, from the DRM standard (ETSI ES 201 980). GPL 2 or later.
- The demo's DRM jingle is an original tune written for OFFgrid-SDR, encoded once with FAAC's DRM encoder, with four fixes made for it and offered back to the FAAC project; its xHE-AAC and DAB+ versions with libxaac's encoder, and its MP2 version with FFmpeg. None of these encoders is in OFFgrid-SDR: only what they made.
- ft8_lib by Kārlis Goba: the FT8 and FT4 protocol tables, error correction, message formats and decoding method that OFFgrid-SDR's FT8 and FT4 decoders follow. MIT License. FT8 and FT4 themselves were created by Joe Taylor, K1JT, and Steve Franke, K9AN (WSJT-X).
- acarsdec by Thierry Leconte, whose method of demodulating ACARS (MSK) OFFgrid-SDR's own ACARS decoder follows.
- Fraunhofer IIS's reference Journaline decoder (in Dream's source, GPL 2 or later), which OFFgrid-SDR's own Journaline decoder follows.
- SDRplay's published SDRconnect WebSocket API specification, which OFFgrid-SDR's network input follows. No SDRplay code is used.
- dumpvdl2 by Tomasz Lemiech, and its libacars: OFFgrid-SDR's own VDL2 decoder follows the VDL Mode 2 standard (ICAO Annex 10, ETSI EN 301 841), with dumpvdl2 as the reference it was checked against, frame for frame, on a real recording. No dumpvdl2 code is used.
- Aircraft countries follow ICAO's allocation of 24-bit aircraft addresses (Annex 10, Volume III), as listed by tar1090; the table is built in, so it works offline.
- lamejs, the JavaScript port of the LAME MP3 encoder. LGPL.
- RNNoise by Jean-Marc Valin (Mozilla and the Xiph.Org Foundation), the neural network behind the AI voice cleaner (BSD licence), in the WebAssembly build @jitsi/rnnoise-wasm by Jitsi (Apache License 2.0).
- Barlow Semi Condensed and Share Tech Mono fonts. SIL Open Font License.
- esbuild, which bundles everything into a single file that runs offline.
- Zadig by Pete Batard, for installing the WinUSB driver on Windows.
- Shortwave.Live, the schedule database the Identify menu's "Shortwave radio schedule" opens.
- Frequencies for the Mystery stations come from Priyom.
- Callsign countries follow the ITU's allocation of callsign prefixes to countries.
- PSK31 and its Varicode alphabet were created by Peter Martinez, G3PLX.
- WSPR was created by Joe Taylor, K1JT. OFFgrid-SDR's WSPR decoder follows the published protocol, and was checked against the encoder in WsprryPi.
- The time-code formats are published by the National Research Council Canada (CHU) and NIST (WWV and WWVH); the WWV bit layout follows the NTP project's WWV driver.
- Taking decoded FT8 stations out of the signal to find weaker ones follows the method of WSJT-X by Joe Taylor, K1JT, and its developers.
- APRS was created by Bob Bruninga, WB4APR. OFFgrid-SDR's APRS decoder follows the published AX.25 and APRS specifications, and the Mic-E format published by TAPR.
- AIS follows the ITU's published standard (ITU-R M.1371). The decoder was checked against the example messages in Eric S. Raymond's AIVDM/AIVDO protocol decoding guide for gpsd.
OFFgrid-SDR is free software, under the GNU General Public License, version 3 or (at your option) any later version: you may use, share and change it, and changed versions you share must stay under the same licence. See the LICENSE file. The licence texts for the parts it includes are in the licenses folder, and the source and build scripts of the decoders built into it in compiled form, which the GPL asks to accompany them, are in the licenses/faad2, licenses/libxaac and licenses/pl_mpeg folders.
73!




















