Support for USB->CAN cable from Varstrom

[malagatech]

I have a USB to CAN cable from Varstrom for use with my BBSHD. The cable does read and write values when connected to a different Bafang configuration tool. It shows up in Device Manager as a COM device. However, in OpenBafangTool when I select "CAN" for the Device Protocol, the only option I get in the USB Device menu is "Demo".

[lnsandn01]

I have the exact problem. But for me after doing one setting with the Varstrom display, my whole bike got bricked. I would like to bypass the screen, read off the currently set properties and fix the problem. The display works and seems to be able to at least store set values (yet i am not sure if they are actually written to the controller, or if something wrong is written to it)

[Procodecom]

Same problem...

[king-rulez]

I have the same problem.

[Iols974]

I have a USB to CAN cable from Varstrom for use with my BBSHD. The cable does read and write values when connected to a different Bafang configuration tool. It shows up in Device Manager as a COM device. However, in OpenBafangTool when I select "CAN" for the Device Protocol, the only option I get in the USB Device menu is "Demo".

According the documentation : https://github.com/andrey-pr/OpenBafangTool/blob/master/docs/General%20manual.md
If you have motor with CAN, select your BESST Tool USB device. Also, there is a item Demo that connects program to virtual device for test purposes.

I assume Varstrom cable is not "YET" supported but only the "BESST Tool USB"