Skip to content

build(deps): bump hackney from 4.9.1 to 4.10.1 in /copi.owasp.org - #3787

Closed
dependabot[bot] wants to merge 1 commit into
masterfrom
dependabot/hex/copi.owasp.org/hackney-4.10.1
Closed

dependabot[bot] wants to merge 1 commit into
masterfrom
dependabot/hex/copi.owasp.org/hackney-4.10.1

Conversation

@dependabot

@dependabot dependabot Bot commented on behalf of github Nov 13, 2026

Copy link
Copy Markdown
Contributor

Bumps hackney from 4.9.1 to 4.10.1.

Release notes

Sourced from hackney's releases.

4.10.1

Fixed

  • The insecure request option was ignored on HTTPS connections, pooled or not: certificates were still verified, so a server with a self-signed certificate was refused. It now disables verification as documented, for HTTP/1.1, HTTP/2 and HTTP/3.
  • {verify, verify_none} in ssl_options did not turn off verification: the default hostname check still ran and refused self-signed certificates. It now skips that check, and HTTP/3 honors it too.
  • insecure set in connect_options made HTTPS requests fail with badarg. It now disables verification like the top-level option.

4.10.0

Security

  • A server could make hackney buffer an unlimited amount of data despite max_body_size, by sending an HTTP/1.1 chunked body made of one very large chunk: the limit was only checked once a whole chunk had arrived. Chunk data is now handed on as it arrives, so the limit holds and streamed reads no longer wait for the end of a chunk. A chunk-size line longer than 4096 bytes or a size of more than 16 hex digits is now refused.

Changed

  • An HTTP/2 or HTTP/3 request made when the connection is at the server's limit on concurrent streams now waits for a free stream instead of failing at once. Many servers allow 100 or 128 at a time, so a burst of requests used to fail where HTTP/1.1 would have queued them. A request waits up to checkout_timeout, then fails with checkout_timeout. Based on work by Lennart Schoch (#972).
  • A request the server refused without processing it, because of a GOAWAY, an HTTP/2 refused stream or an HTTP/3 rejected request, is now sent once more on a fresh connection, whatever its method. It used to fail, and most callers did not know that error was safe to retry. A body given as a function is not sent twice. Based on work by Lennart Schoch (#971).
  • quic 2.6.1, h2 0.15.0 and webtransport 0.5.3. These bring fixes for an HTTP/3 header block that could keep a CPU busy for minutes, and for two HTTP/2 denial-of-service attacks (MadeYouReset and SETTINGS flood), plus many protocol conformance and reliability fixes.
  • WebTransport now speaks draft-17 over HTTP/3 and draft-16 over HTTP/2. Servers on older drafts may no longer connect; a draft07 compat mode is available for draft-07 servers. WebTransport over HTTP/2 now needs TLS 1.3.
  • When an HTTP/3 server closes the connection with an error code, the error you get now carries that code and phrase instead of reporting a normal close.

... (truncated)

Changelog

Sourced from hackney's changelog.

4.10.1 - 2026-11-10

Fixed

  • The insecure request option was ignored on HTTPS connections, pooled or not: certificates were still verified, so a server with a self-signed certificate was refused. It now disables verification as documented, for HTTP/1.1, HTTP/2 and HTTP/3.
  • {verify, verify_none} in ssl_options did not turn off verification: the default hostname check still ran and refused self-signed certificates. It now skips that check, and HTTP/3 honors it too.
  • insecure set in connect_options made HTTPS requests fail with badarg. It now disables verification like the top-level option.

4.10.0 - 2026-11-09

Security

  • A server could make hackney buffer an unlimited amount of data despite max_body_size, by sending an HTTP/1.1 chunked body made of one very large chunk: the limit was only checked once a whole chunk had arrived. Chunk data is now handed on as it arrives, so the limit holds and streamed reads no longer wait for the end of a chunk. A chunk-size line longer than 4096 bytes or a size of more than 16 hex digits is now refused.

Changed

  • An HTTP/2 or HTTP/3 request made when the connection is at the server's limit on concurrent streams now waits for a free stream instead of failing at once. Many servers allow 100 or 128 at a time, so a burst of requests used to fail where HTTP/1.1 would have queued them. A request waits up to checkout_timeout, then fails with checkout_timeout. Based on work by Lennart Schoch (#972).
  • A request the server refused without processing it, because of a GOAWAY, an HTTP/2 refused stream or an HTTP/3 rejected request, is now sent once more on a fresh connection, whatever its method. It used to fail, and most callers did not know that error was safe to retry. A body given as a function is not sent twice. Based on work by Lennart Schoch (#971).
  • quic 2.6.1, h2 0.15.0 and webtransport 0.5.3. These bring fixes for an HTTP/3 header block that could keep a CPU busy for minutes, and for two HTTP/2 denial-of-service attacks (MadeYouReset and SETTINGS flood), plus many protocol conformance and reliability fixes.
  • WebTransport now speaks draft-17 over HTTP/3 and draft-16 over HTTP/2. Servers on older drafts may no longer connect; a draft07 compat mode is available for draft-07 servers. WebTransport over HTTP/2 now needs TLS 1.3.

... (truncated)

Commits
  • 82fceb7 Merge pull request #1010 from benoitc/release/4.10.1
  • ced03cf Release 4.10.1
  • 4132cc6 Merge pull request #1009 from benoitc/fix/insecure-followups
  • 5f69563 Honor insecure in connect_options and verify_none on HTTP/3
  • 4bc4b56 Merge pull request #1008 from benoitc/fix/top-level-insecure
  • 5d16190 Honor the top-level insecure option and a bare verify_none
  • adb347f Merge pull request #1007 from benoitc/release/4.10.0
  • 26fabb1 Release 4.10.0
  • a4d2efa Merge pull request #1006 from benoitc/fix/goaway-retry
  • e4976f5 Merge remote-tracking branch 'origin/master' into fix/goaway-retry
  • Additional commits viewable in compare view

Dependabot compatibility score

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

  • @dependabot rebase will rebase this PR
  • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
  • @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
  • @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
  • @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
  • @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [hackney](https://github.com/benoitc/hackney) from 4.9.1 to 4.10.1.
- [Release notes](https://github.com/benoitc/hackney/releases)
- [Changelog](https://github.com/benoitc/hackney/blob/master/NEWS.md)
- [Commits](benoitc/hackney@4.9.1...4.10.1)

---
updated-dependencies:
- dependency-name: hackney
  dependency-version: 4.10.1
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
@dependabot
dependabot Bot requested review from rewtd and sydseter as code owners November 13, 2026 06:53
@dependabot dependabot Bot added dependencies Pull requests that update a dependency file elixir Pull requests that update elixir code labels Nov 13, 2026
@dependabot @github

dependabot Bot commented on behalf of github Nov 16, 2026

Copy link
Copy Markdown
Contributor Author

Superseded by #3793.

@dependabot dependabot Bot closed this Nov 16, 2026
@dependabot
dependabot Bot deleted the dependabot/hex/copi.owasp.org/hackney-4.10.1 branch November 16, 2026 07:04
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

dependencies Pull requests that update a dependency file elixir Pull requests that update elixir code

Projects

None yet

Development

Successfully merging this pull request may close these issues.

0 participants