From ad70a54bd52003ffc51c3537a82a56238d178d3a Mon Sep 17 00:00:00 2001 From: Darrell Date: Sat, 31 Oct 2026 11:48:07 -0400 Subject: [PATCH] docs: drop --dma-bisect from README The flag never landed on main; PR #11 was closed once ESPresense#2309 was fixed. Co-Authored-By: Claude Opus 5.5 --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 64f268f..9c821db 100644 --- a/README.md +++ b/README.md @@ -5,7 +5,7 @@ Hardware-in-the-loop harness for [ESPresense](https://github.com/ESPresense/ESPr ## What is in here * `scripts/improv_wifi.py` — provisions WiFi over [Improv Serial](https://www.improv-wifi.com/serial/): requests device info (validates the frames and their checksums), sends the credentials, and expects the `provisioning` state. -* `scripts/hil_monitor.py` — watches the serial console for `--duration` seconds and fails on crash patterns, restarts, missing scan results, the MQTT reconnect limit, a misbehaving `/json` under concurrent load, or a declining heap (see the exit codes at the top of the file). `--dma-bisect` runs the A/B browser-load heap test. +* `scripts/hil_monitor.py` — watches the serial console for `--duration` seconds and fails on crash patterns, restarts, missing scan results, the MQTT reconnect limit, a misbehaving `/json` under concurrent load, or a declining heap (see the exit codes at the top of the file). * `scripts/test_*.py` — host-side tests for the monitor's heuristics (`python3 -m pytest scripts`). * `Dockerfile` — the `ghcr.io/espresense/firmware-tester` image (PlatformIO + the scripts) used by the Arduino-era pipeline. The ESP-IDF firmware runs these scripts from the `espressif/idf` image and clones this repo at run time.